详细介绍
玖城牌合成切削液
产品型号:NC405 NC406
产品描述:玖城牌半合成切削液是合成极压型产品,不含矿物油,由多种优质进口水溶性添加剂采用先进工艺调制而成,适用于特殊硬质材料、合金钢、不锈钢。长寿命,长期使用不变质,优良防锈性,良好润滑性,和优越抗极压效果,具很好低泡性,适用各种不同硬度、不同金属材质在CNC多刀具加工中心使用。
产品特点:
优异的润滑和冷却性能,可减轻刀具结屑瘤,提高加工件精度,降低刀具损耗。
良好的防锈、防腐性能,碱性低,对皮肤、眼睛无刺激。
浓缩液含且高,使用比例低,抗微生物性能好,工作液寿命长。
加工时渗透性好,清洗性好,对机床油漆无影响。
产品应用:
适用于金属的重负荷车削、铣削、磨削、钻削、攻丝等加工,能适合加工中心多刀具、多种金属混合加工的复杂状况,起润滑、冷却和防锈作用。
推荐使用浓度3%~10%
JC Synthetic Cutting Fluid
Product number:NC405 NC406
Product description:
JC semi synthetic cutting fluid is a synthetic extreme pressure product without mineral oil.It is made up of many advanced imported water soluble additives using advanced technology refined.Suitable for special hard material, alloy steel and stainless steel.Long life, long-term use not metamorphic, excellent antirust, good lubricity,extreme anti -pressure effect, very good low bubble.Applicable to various hardness and different metal materials used in CNC multi-tool machining center.
Performance characteristics:
Excellent lubrication and cooling performance can reduce the nodules of tools, improve machining accuracy and reduce tool wear.
Good anti-rust, anticorrosive properties, low alkalinity, no irritation to skin and eyes.
The concentrate has high content, low use ratio, good microbiological resistance and long service life.
Good permeability during processing, good cleaning, no effect on machine tool paint.
Recommended use:
It is suitable for metal heavy load turning, milling, grinding, drilling, tapping and so on. It can be suitable for the complex conditions of Multi Tool and metal mixed processing in the processing center, and it can play the role of lubrication, cooling and rust prevention.
Recommended using concentration of 3% to 10%.
玖城牌半合成切削液典型数据:Typical data of JC semi synthetic cutting fluid:
项目Project |
典型数据Typical data |
|
稀释液,% Diluent,% |
5 |
|
PH值 PH value |
8-9 |
|
消泡性ml/10min Defoaming ml/10min |
≤2 |
|
腐蚀试验(55℃±2℃) Corrosion test(55℃±2℃) |
钢片Steel sheet |
≥24h |
铜片Copper sheet |
≥4h |
|
铝片Aluminum sheet |
≥4h |
|
防锈试验(35±2RH95%h)一级灰口铁 Anti-rust test(35±2RH95%h)First grade gray iron |
单片Monolithic |
≥24h |
叠片Lamination |
≥4h |
|
对机床油漆的适应性Adaptability to machine tool paint |
合格Pass |